Major Specifications - Panasonic LA-511 Instruction Manual

3

Major Specifications

Type
Item Model No.
Sensing Width
Sensing Distance
Repeat Accuracy
Power Source
Current Consumption
Analog Voltage
Output
Comparison Output
Output Operation
Short Circuit Protection
Response Time
Remote Interlock Input
Operation Indicator
Radiation Indicator
Laser Beam
Alignment Monitor
Analog Voltage Output
Comparison Output
Ambient Temperature
Ambient Humidity
Emitting Element
Ground
Enclosure's Material
Accessories
(Note)
In case of using this product as a CE marking conformity product, cable extension of the power wire and
I/O wire must be wthin 30m.
12 to 24V DC ±10%, Ripple : 10% P-P or less
･Output voltage :
※
1V (When all beam interrupted) to 5V (When all beam received)
･Through rate : 8V/ms or over
･Temperature characteristic : 0.1% of F.S. per 1℃
･Output impedance : 75 ohms
NPN transistor ･ open collector
･Sink current : max. 100mA
･Applied voltage : 30V DC or less
･Residual voltage : 1V or less (at 100mA sink current)
0.4V or less (at 16mA sink current)
Laser radiated when connected to 0V, and radiation stopped when
left opened or connected to +V.
Red LED lights when comparison output is in ON state.
Red LED lights when laser is radiated.
Green LED lights when beam received properly, and yellow LED
lights when beam is deviated from center.
Span adjustment : with endless, 18 turn adjustor.
Comparison level adjustment : with endless, 18 turn adjustor.
0 to +50℃ (No dew condensation nor icing allowed)
-20 to +70℃ (storage)
Line-bypass capacitor system
Enclosure : zinc die-casting, Top cover : PRO,
Front protective cover : Glass
MS-LA1 (mounting bracket) : 2 sets,
Screwdriver for adjustment 1 pc.
Pressure terminals : 2 pcs.
3
Thru-beam
LA-511
15mm
500mm
60mA or less
Dark-ON
Provided
0.5ms or less
35 to 85%RH
Invisible laser beam