Side-View Attachment (La-Sv1)(Optionally Available) - Panasonic LA-511 Instruction Manual

9

Side-View attachment (LA-SV1)(optionally available)

●When using the side-view attachment, mount it on either projector or detector.
If mounting the attachment on both units, one or more of yellow LED indicators, beam
alignment monitor, may not go out.
●The side-view attachment always must be mounted under the condition that the radiation
indicator is not glowing.
●The tightening torque should be 0.49N･m {5 kgf･cm} or less.
●Don't touch the side-view attachment on the interior, as detection performance may be
adversely affected.
●Do not give the side-view attachment an excessive shock.
●Since laser beam has a directional property, be careful with the mounting direction of the
side-view attachment and the sensor.
●Dimensions of LA-SV1 after set
32
（112）
32
32
47.8
13
75 5
Unit: mm