Detune Harmony Parameters - Yamaha PLG100-VH Owner's Manual

Detune Harmony Parameters

The Detune type produces a slightly "detuned" pitch and mixes it with the input signal for
a rich chorusing effect. The amount of the detuning is set in the Mode parameter (below).
MIDI note data from a keyboard or sequencer has no effect in this type.
Parameter List .................................................................................
No. Parameter
1 Mode
2
3 Lead Gender Type
4 Lead Gender Depth
5
6
7
8
9
10 Lead/Harmony
11 Vibrato Depth
12 Vibrato Rate
13 Vibrato Delay
14 Insertion Part
Parameter Descriptions ..................................................................
1. Mode
• low
Detunes the pitch by 7 cents (least amount of detuning).
• mid-low
Detunes the pitch by 11 cents.
• mid-high
Detunes the pitch by 15 cents.
• high
Detunes the pitch by 20 cents (most amount of detuning).
• When Detune is selected, the following parameters are not available:
Other Parameters
The remaining parameters for the Detune Type are the same as those for the Vocoder
Type, described on pages 14~18.
2. Harmony Gender Type
5. Lead Pitch Correction
6. Auto Upper Gender Threshold
7. Auto Lower Gender Threshold
8. Upper Gender Depth
9. Lower Gender Depth
Harmony Parameters
Display
1: low 2: mid-low
3: mid-high 4: high
off, unis, male, fem.
-64 — +63
L63>H — (L=H) — L<H63
0 — 127
0 — 127
0 — 127
off, 1 — 64, AD1 — AD64
Value Default value
0 — 3 0
0 — 3 0
0 — 127 64
1 — 127 64
0 — 127 39
0 — 127 47
0 — 127 0
0 — 127 127
21