The Function Mode; To Select A Function - Yamaha P-80 Owner's Manual

The Function Mode

The [FUNCTION] button provides access to a range of functions that give the
P-80 extraordinary versatility. The functions are categorized in groups as follows:
F1
F2
F3
F4
F5
F6
F7
F8
F9

To Select a Function

Z
Press the [FUNCTION] button so that its indicator lights.
• Functions cannot be selected during demo/preset song playback or
NOTE
when the user song recorder is in operation.
X
Use the [TEMPO/FUNCTION# M,L] buttons to select the
desired function from F1 through F9.
C
In the case of the Scale (F2), Dual Mode (F3), Split Mode
(F4), MIDI (F8), and Backup (F9) functions, you will have to
press the [+/YESL] button once to enter the respective sub-
mode after the function has been selected, and then use the
[TEMPO/FUNCTION# M,L] buttons again to select the
desired sub-function.
• The Dual or Split mode must be engaged before the F3 and F4
NOTE
functions can be selected, respectively. If the corresponding mode
is not engaged, "
corresponding sub-mode will not be available.
• The Dual mode can be engaged while in the Function mode, but
the Function mode must be exited before the Split mode can be
engaged.
V
Set the function as required by using the [–/NOM] and [+/
YESL] buttons (see the individual function descriptions,
below).
• After selecting the function, the current setting will be displayed
NOTE
when [–/NO
B
Press the [FUNCTION] button so that its indicator goes out to
exit from the function mode.
26
P-80
Tuning ................................................................... 27
Scale ...................................................................... 27
Dual Mode Functions ........................................... 28
Split Mode Functions ........................................... 29
Sound Board Depth ............................................. 30
Metronome Volume .............................................. 31
Preset Song Part Cancel Volume ........................ 31
MIDI Functions ..................................................... 32
Backup Functions ................................................ 35
..........................................................................
F3 .-" or " F4 .-" will appear on the display and the
M L
] or [+/YES ] button is pressed for the first time.
START/ TEMPO/
STOP FUNCTION# FUNCTION
START/ TEMPO/
STOP FUNCTION# FUNCTION
G Operation Example
Press [+/YESL]
Use [TEMPO/FUNCTION# t, s]
Press [–/NOM] or
[+/YESL] once
Use [–/NOM], [+/YESL]
(sub-mode)