Bose AM189930 Owner's Manual page 15

To use
Auto Reset
To check
Alarm 1
To check
Alarm 2
To set the
volume of
the alarm
To snooze
To stop
the alarm
To disable
Alarm 1
To disable
Alarm 2
To wake to
your favorite
station
Alarm
operation
during a
power failure
AM189930_01_V.pdf
Remote Control Operation
While the alarm sounds, press ON/OFF once. The alarm
stops and resets to go off at the same time tomorrow. If you
do not turn off the alarm, it continues to sound for 30
minutes. Then it stops and resets to go off at the same time
tomorrow.
Press TIME on your remote control. The display shows the
wake up time for Alarm 1. Press TIME again to return to
normal display.
Press TIME. Then press . The display shows the wake
up time for Alarm 2.
Press TIME. Then press . The normal display returns.
For the radio ( ), use the VOLUME buttons to set the volume.
For tone ( ), choose the alarm sound (see page 13).
Set the alarm to go off. When alarm sounds, press either
VOLUME button to adjust the volume.
Press ON/OFF to silence the alarm. This automatically resets
the alarm to repeat tomorrow.
When the alarm is in tone ( ) or radio (
SLEEP to pause the alarm for ten minutes.
When the alarm is in tone and radio (
SLEEP on your remote control to pause the tone and hear the
radio. The tone sounds again in ten minutes. Press again to
silence the radio. The alarm indicator flashes while paused.
Press ON/OFF once. The indicators remain lit. The alarm
repeats tomorrow.
To turn off the alarm function, press
and ( ) indicators do not appear on the display. The
alarm must be reset for next use.
Press TIME. Then press
TIME again. Press until the (
tors no longer appear on the display.
Use the radio control panel to select this feature.
Press ON/OFF to silence. Backup batteries run the alarm for
approximately a week during power failure. To conserve power,
only the tone sounds, even if radio is selected. Normal opera-
tion resumes when power is restored. Batteries should be re-
placed after an extended power failure.
January 4, 2002
) mode, press
) mode, press
until the ( )
. Alarm 2 flashes. Press
) and ( ) indica-
Functions
ON/OFF
TIME ALARM
TIME ALARM
VOLUME
ON/OFF
SLEEP
ON/OFF
TIME ALARM
TIME ALARM
ON/OFF
15