Digital Output - Yamaha DVD-C900 Owner's Manual

1, 2, 3
OPEN/
DISC SKIP DISC MODE TIME
CLOSE
CANCEL S/F REPEAT A-B RANDOM PROG
1 2 3 4 5
6 7 8 9 0
+1 0
ANGLE RETURN TITLE/INDEX
SELECT
TITLE AUDIO
MENU MULTI SPEED SUBTITLE
SET UP OFF/ON
SKIP/SEARCH
STOP STILL/PAUSE PLAY
ON SCREEN
Initial settings (on the SET UP menu)
Audio Settings
The items in this group control audio signals output from the
AUDIO OUT terminals on the rear of this unit.
Note: The item No. 2 "Dynamic Range Control" and No. 3
"Speaker" are available for China and General models only.
1

Digital Output

On this item, you can select the format of digital signal to be
output from the OPTICAL and COAXIAL DIGITAL output
terminals of this unit for respective formats recorded on DVD
discs.
Depending on the format of digital signal, you can make this
unit convert the disc's original format of digital signal into PCM
(48 kHz) format for outputting signals, or you can make this
unit output no signal from the OPTICAL and COAXIAL
DIGITAL output terminals of this unit.
1
When the SET UP group "Audio Settings" is
selected, press or
and then press SELECT.
Audio Settings DVD
1 Digital Output
2
Press or to select the format of digital signal
for which you will change the current setting, and
then press SELECT.
Audio Settings
1 96kHz LPCM
2 Dolby Digital
3 DTS
4 MPEG
3
Press or to select the preferred mode, and
then press SELECT.
Audio Settings
1 48kHz PCM
2 OFF
Note
The settings on this item are only applicable when playing
back a DVD.
to select "1 Digital Output",
VCD Display Audio
Digital Output
48kHz PCM
Disc Original
Disc Original
PCM
96kHz LPCM
59