Related Manuals for Yamaha DVD-C900
Summary of Contents for Yamaha DVD-C900
-
Page 1: Lecteur Dvd
NATURAL SOUND DVD PLAYER LECTEUR DVD NATURAL SOUND DVD PLAYER DVD-C900 DVD / VIDEO CD / CD PLAYXCHANGE OPEN/CLOSE DISC AUTO DISPLAY OFF SKIP/ SEARCH POWER OWNER’S MANUAL MODE D’EMPLOI... -
Page 2: Safety Instructions
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT Please record the serial number of your unit in the space below. - Page 3 This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables.
-
Page 4: Table Of Contents
Thank you for selecting this YAMAHA DVD player CONTENTS SAFETY INSTRUCTIONS ... Inside of the front cover Features ...1 Caution ...2 Getting started ...4 Unpacking ...4 Installing batteries in the remote controller ...5 Notes about the remote controller ...5 Names of parts and their functions ...6 Connections ...9... -
Page 5: Features
5-Disc Carousel Auto-Changer (for Playing DVDs, Video CDs and Compact Discs) Full Opening Disc Table for Changing 5 Discs at a Time Compatible with Almost of All Utility Functions of DVD Discs PLAYXCHANGE; Disc Changing Capability while Playing Another Program Play Random Play Single Track/Full Disc Repeat Play and A-B Repeat Play for Repeating a Section... -
Page 6: Caution
Using this unit with a higher voltage than that which is specified is dangerous and may result in a fire or other type of accident causing damage. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified. - Page 7 – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
-
Page 8: Getting Started
Unpacking Carefully take this unit and accessories out of the box. You should find the unit itself and the following accessories. Remote controller DISC SKIP DISC MODE TIME CANCEL REPEAT RANDOM +1 0 ANGLE RETURN TITLE/INDEX TITLE SELECT MENU MULTI SPEED SET UP SKIP/SEARCH ON SCREEN... -
Page 9: Installing Batteries In The Remote Controller
Installing batteries in the remote controller Since the remote controller will be used for many of this unit’s control operations, you should begin by installing the supplied batteries. Turn the remote controller over and slide the battery compartment cover in the direction of the arrow. Insert the batteries (R6, AA, UM-3 type) according to the polarity markings on the inside of the battery compartment. -
Page 10: Names Of Parts And Their Functions
Names of parts and their functions See the pages in parenthesis for details regarding operation. Front panel NATURAL SOUND DVD PLAYER DVD-C900 AUTO DISPLAY OFF POWER Remote controller K L M DISC SKIP DISC MODE TIME CANCEL REPEAT RANDOM ANGLE... - Page 11 SKIP/SEARCH buttons (p. 19, 22, 24, 25) SKIP Press this button to locate the beginning of the next chapter or next track. SKIP Press this button to locate the beginning of the currently playing chapter or track, or the previous chapter or track.
-
Page 12: Front Panel Display
Names of parts and their functions Front panel display 234 56 7 8 DVD VCD CD PBCPGMRDM TRACK Lights up when this unit is in the Playback Control mode for playing a Video CD, version 2.0. Lights up when the selected disc is a DVD. Lights up when this unit is in the program play mode. -
Page 13: Connections
Speaker setup We recommend you to set up a multi-speaker system to enjoy the 5.1 channel surround sound of sources encoded with Dolby Digital, MPEG or DTS. Speaker configuration The most recommended speaker configuration is the 6 speaker configuration: 2 main speakers, 2 effect speakers, a center speaker and a subwoofer. -
Page 14: Audio Connections
Connections Caution: Plug in this unit and other components after all connections are completed. All connections must be correct, observing the color coding of terminals between this unit and other components. Audio connections Connecting to an AV amplifier (or receiver) equipped with a Dolby Digital, MPEG or DTS decoder, or connecting to a Dolby Digital, MPEG or DTS decoder When you connect this unit to an AV amplifier or receiver... - Page 15 Notes on connecting to this unit’s OPTICAL terminal ● Before using this terminal, remove the terminal’s cover by pulling it. ● Make the connection from this terminal to the optical input terminal of an amplifier by using a commercially available optical fiber cable.
-
Page 16: Connecting To An Av Amplifier (Or Receiver) Equipped With 6 Channel Input Terminals For China And General Models Only
Connections Connecting to an AV amplifier (or receiver) equipped with 6 channel input terminals For China and General models only This unit includes a Dolby Digital decoder. This enables the playback of DVDs encoded with Dolby Digital without the need for an external Dolby Digital decoder. -
Page 17: Connecting To A Stereo Amplifier That Has Neither 6 Channel Audio Signal Input Terminals Nor Dolby Digital Decoder
Connecting to a stereo amplifier that has neither 6 channel audio signal input terminals nor Dolby Digital decoder Connect this unit’s MIXED 2CH AUDIO OUT terminals to the amplifier’s audio signal input terminal printed as “DVD”, “VIDEO”, “AUX”, etc. 6 channel audio signals encoded with Dolby Digital are mixed down into 2 channels and output from the MIXED 2CH AUDIO OUT terminals. -
Page 18: Video Connections
Connections Video connections Connecting to an amplifier equipped with an RCA type video signal input terminal (including an S-video input terminal) Connect this unit’s VIDEO 1 (or 2) terminal to the amplifier’s RCA type video signal input terminal (labeled “DVD/LD” etc.). If your amplifier has an S-video input terminal, you can connect this unit’s S VIDEO terminal to the amplifier’s S-video input terminal by using a commercially available S-connector cable. -
Page 19: Connecting To A Tv Equipped With Component Video Input Terminals
MODE SELECT (PAL/NTSC) switch This unit is designed for use with the NTSC and PAL television formats. Set this switch to the position for the format your TV monitor employs. MODE SELECT NTSC S VIDEO COMPONENT VIDEO VIDEO OUT Connecting to a TV equipped with component video input terminals You can connect this unit’s COMPONENT VIDEO OUT terminals to your TV or projector, if your TV or projector has component video signal input terminals. -
Page 20: Basic Operation
TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN NATURAL SOUND DVD PLAYER DVD-C900 AUTO DISPLAY OFF POWER CD / CD DISC Basic operation The On-Screen Display language of your model has been factory preset as follows: U.S.A. -
Page 21: To Stop Playback
OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN STOP ( CD / CD DISC Select the preferred item by using then press SELECT, or select the item simply by pressing the corresponding numeric button(s). - Page 22 Basic operation Direct playback • Pressing DISC (1, 2, 3, 4 or 5) on the front panel will select the disc directly (even if the disc table is open), and playback will begin automatically. • Even if the disc table is open, pressing PLAY will close the disc table and begin playback of the disc 1.
-
Page 23: Playing Back A Preferred Scene Or Track
Playing back a preferred scene or track OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG Numeric buttons +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN CD / CD PLAYXCHANGE DISC... -
Page 24: Beginning Playback From A Preferred Title (For Dvds) Or Index Number (For Video Cds/Cds)
Basic operation DISC SKIP DISC MODE CANCEL REPEAT +1 0 ANGLE SELECT TITLE MENU SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN For DVDs: You can select any preferred title on the disc. OPEN/ TIME CLOSE For Video CDs/CDs: RANDOM PROG You can select any index number if the disc has index numbers. -
Page 25: Beginning Playback From A Preferred Time Point
OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN CD / CD PLAYXCHANGE DISC Beginning playback from a preferred time point on the title (or disc) You can locate a preferred time point on the title (or disc) by... -
Page 26: Other Ways Of Playback
Basic operation Other ways of playback DISC SKIP DISC MODE CANCEL REPEAT +1 0 ANGLE SELECT TITLE MENU SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN CD / CD DISC DISC SKIP DISC MODE CANCEL REPEAT +1 0 ANGLE SELECT TITLE MENU STILL/PAUSE SET UP... -
Page 27: To Advance Or Reverse Playback In A Preferred Speed
OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN To advance or reverse playback in a preferred speed (Multi-speed playback) [ D V D V C D... - Page 28 Basic operation DISC SKIP DISC MODE CANCEL REPEAT +1 0 ANGLE TITLE SELECT MENU SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN STOP ( CD / CD DISC If you want to change the playback direction during playback in a slow or rapid speed 1.
-
Page 29: Operations Unique For A Video Cd In The Playback Control Mode
OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN CD / CD PLAYXCHANGE DISC Operations unique for a Video CD in the Playback Control mode V C D only... -
Page 30: C D
Basic operation DISC SKIP DISC MODE CANCEL REPEAT ANGLE SELECT TITLE MENU SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN You can change the output mode of the MIXED 2CH left and right audio output terminals of this unit. This operation is useful OPEN/ TIME CLOSE... -
Page 31: Displaying Various Information
Displaying various information Switching the time display VCD CD TIME TITLE VCD CD TIME TITLE REMAIN VCD CD TOTAL TIME TITLE VCD CD TOTAL TIME TITLE REMAIN TIME OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG ANGLE RETURN TITLE/INDEX SELECT TITLE... - Page 32 Displaying various information TRACK INDEX TRACK INDEX TRACK INDEX TRACK INDEX TIME DISC SKIP DISC MODE CANCEL REPEAT ANGLE SELECT TITLE MENU SET UP SKIP/SEARCH For Video CDs/CDs: DISC [Example] TIME When the second track is being played back. (Refer to the illustration on the left.) DISC TIME...
-
Page 33: On Screen Display
On Screen Display DISC SKIP DISC MODE TIME CANCEL REPEAT RANDOM ANGLE RETURN TITLE/INDEX SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN ON SCREEN Display description Type 1 The currently selected disc number The type of the current disc (DVD, VCD or CD) The current title number or track number The current chapter number (C00) or index number (I00) The angle icon is shown during playing back a scene of a... - Page 34 Displaying various information Type 2 For DVDs Title Total Time Analog Audio Output Digital Audio Output Audio Language Audio Format Subtitle Language Angle The total playing time of the current title. Shows whether the analog AUDIO OUT terminals output signals (Output) or not (Muted). The audio format and the format of the digital signals output to the OPTICAL and COAXIAL DIGITAL AUDIO...
- Page 35 Type 3 The types of discs on the disc table are shown for each tray number. *1: Shows that this unit has not identified the type of the disc on the tray 2 because the disc had never been selected before. Disc 1 Disc 2 Unidentified...
-
Page 36: Advanced Operation
Repeat play DISC SKIP DISC MODE TIME CANCEL REPEAT RANDOM +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN CD / CD DISC Advanced operation All discs, an entire disc, a single title or track, a sequence of programmed selections, or a sequence of random play selections can be continuously repeated. -
Page 37: Repeat Play Between Specified Two Points (A-B Repeat Play)
Repeat play between specified two points (A-B repeat play) OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN The section between two points you specify on a disc is repeatedly played back. -
Page 38: Program Play
Advanced operation Program play DISC SKIP DISC MODE CANCEL REPEAT CANCEL +1 0 ANGLE SELECT TITLE MENU SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN STOP ( CD / CD DISC You can program desired titles of DVDs and tracks of Video CDs/CDs on the disc table in any desired order. - Page 39 Display information during programming Front panel display Every time you program a title or track, the total playing time is shown for about one second in place of the program sequence number. Lights up either indicator depending on the type of the selected disc. Selected title or track number VCD CD PBCPGMRDM...
- Page 40 Advanced operation DISC SKIP DISC MODE DISC SKIP CANCEL REPEAT CANCEL Numeric +1 0 ANGLE buttons TITLE SELECT MENU SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN STOP ( PLAYXCHANGE O CD / CD DISC DISC (1–5) To stop program play Press STOP ( * This unit memorizes the point where STOP ( OPEN/CLOSE...
-
Page 41: Random Play
Random play OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX TITLE SELECT AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN STOP ( O CD / CD DISC Titles or tracks of a designated disc or all discs on the disc table are played back in a random order. -
Page 42: Changing Subtitle Language
Advanced operation Changing subtitle language DISC SKIP DISC MODE TIME CANCEL REPEAT RANDOM +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN D V D only When you play back a disc on which subtitles are recorded, you can turn on or off displaying subtitles on the monitor screen as you prefer. -
Page 43: Changing Audio Sound Track Language
Changing audio sound track language OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN D V D only When you play back a disc on which two or more audio sound track languages are recorded, you can select the desired audio... -
Page 44: D V D
Advanced operation Using a title menu DISC SKIP DISC MODE TIME CANCEL REPEAT RANDOM +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN D V D only Some discs with movies, for example, may be available with two or more titles. -
Page 45: Using A Dvd Menu
Using a DVD menu D V D OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP SKIP/SEARCH OFF/ON STOP STILL/PAUSE PLAY ON SCREEN only Some DVDs have unique menus called DVD menus. -
Page 46: D V D
Advanced operation Viewing from another angle DISC SKIP DISC MODE TIME CANCEL REPEAT RANDOM ANGLE +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN D V D only Some DVDs may contain scenes which have been shot from two or more angles simultaneously. -
Page 47: Initial Settings (On The Set Up Menu)
Initial settings (on the SET UP menu) This unit provides you with the following items to determine the initial status of this unit. When you first use this unit, check the factory default settings of all the items. If the settings of some items are not suitable for using this unit in your Audio/Video system, change the settings of them. -
Page 48: Common Procedure For Setting Change
Initial settings (on the SET UP menu) Common procedure for setting change 4, 5 DISC SKIP DISC MODE CANCEL REPEAT ANGLE SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN OPEN/ TIME CLOSE RANDOM PROG RETURN TITLE/INDEX AUDIO SUBTITLE OFF/ON... -
Page 49: Item Description And Setting Change
Item description and setting change 1, 2 OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX TITLE SELECT AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN Initial settings (on the SET UP menu) DVD Settings The items in this group are only applicable when playing back a DVD. -
Page 50: Display Mode
Initial settings (on the SET UP menu) 1, 2 DISC SKIP DISC MODE CANCEL REPEAT ANGLE SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN If “Normal 4:3” is selected on the item “1 TV Type”, select the display mode (Letter box or Pan &... -
Page 51: Menu Language
1, 2 OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN Entering a language code number After you select “Others”, press SELECT. * “Language Code”... -
Page 52: Subtitle Language
Initial settings (on the SET UP menu) 1, 2 DISC SKIP DISC MODE CANCEL REPEAT ANGLE SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN When “1 Auto” is selected in step 2, the subtitle language is automatically selected as follows. ●... -
Page 53: Audio Language
1, 2 OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN Initial settings (on the SET UP menu) Audio Language Select the language which is used for audio sound track when playing back a DVD. -
Page 54: Rating Level
Initial settings (on the SET UP menu) DISC SKIP DISC MODE CANCEL REPEAT ANGLE SELECT TITLE MENU MULTI SPEED 1, 2 SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN Some DVDs are encoded with restriction of playback for scenes unsuitable for children. The level of restriction (rating level) differs depending on the contents of discs. - Page 55 OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE 3, 4 SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN Note for US customers The restrictions applied to movies in U.S.A. correspond to the following rating levels.
-
Page 56: Vcd Settings Playback Control
Initial settings (on the SET UP menu) 1, 2 DISC SKIP DISC MODE CANCEL REPEAT ANGLE SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN VCD Settings The item in this group is only effective when playing back a Video CD. -
Page 57: Display Settings
1, 2 OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN Initial settings (on the SET UP menu) Display Settings The items in this group controls the ways of displaying information on the monitor screen and the front panel display. -
Page 58: Osd Language
Initial settings (on the SET UP menu) 1, 2 DISC SKIP DISC MODE CANCEL REPEAT ANGLE SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN Select the language for displaying the OSD (On Screen Display) information. OPEN/ TIME CLOSE RANDOM... -
Page 59: Background Screen
1, 2 OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN Initial settings (on the SET UP menu) Background Screen Select a background image or color to be shown on the monitor screen when no video source is reproduced on the... -
Page 60: Screen Saver
Initial settings (on the SET UP menu) 1, 2 DISC SKIP DISC MODE CANCEL REPEAT ANGLE SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN You can select whether to use the built-in screen saver or not. OPEN/ TIME CLOSE... -
Page 61: Fl Dimmer
1, 2 OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN Initial settings (on the SET UP menu) FL Dimmer Select the brightness of the front panel display. -
Page 62: Signal System Conversion
Initial settings (on the SET UP menu) 1, 2 DISC SKIP DISC MODE CANCEL REPEAT ANGLE SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN This unit is designed for use with the NTSC and PAL televison OPEN/ TIME CLOSE... -
Page 63: Digital Output
1, 2, 3 OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN Initial settings (on the SET UP menu) Audio Settings The items in this group control audio signals output from the AUDIO OUT terminals on the rear of this unit. - Page 64 Initial settings (on the SET UP menu) Selectable modes for respective formats of digital signals recorded on DVDs Format recorded on the disc 1 96kHz LPCM [Linear PCM (96 kHz)] 2 Dolby Digital 3 DTS 4 MPEG (2 or 1) Factory default setting 1 96kHz LPCM: 48kHz PCM 2 Dolby Digital: Disc Original...
-
Page 65: Dynamic Range Control < For China And General Models Only
1, 2 OPEN/ DISC SKIP DISC MODE TIME CLOSE CANCEL REPEAT RANDOM PROG +1 0 ANGLE RETURN TITLE/INDEX SELECT TITLE AUDIO MENU MULTI SPEED SUBTITLE SET UP OFF/ON SKIP/SEARCH STOP STILL/PAUSE PLAY ON SCREEN Dynamic range “Dynamic range” is the difference between the maximum level and the minimum level of sounds. -
Page 66: Speaker
Initial settings (on the SET UP menu) 1, 2, 3 DISC SKIP DISC MODE CANCEL REPEAT ANGLE SELECT TITLE MENU MULTI SPEED SET UP SKIP/SEARCH STOP STILL/PAUSE ON SCREEN Make this unit memorize what types of speakers are used in OPEN/ TIME your speaker system. - Page 67 Selectable modes for respective speakers Speaker(s) Mode 1 Main Speaker 1 Large 2 Small 2 Center Speaker 1 Large 2 Small 3 None 3 Surround Speaker 1 Large 2 Small 3 None 4 Subwoofer 1 Yes 2 No Factory default setting 1 Main Speaker: Large 2 Center Speaker: Small 3 Surround Speaker: Small...
-
Page 68: Appendix
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center. - Page 69 For DVDs only Problem The screen type (4:3 or 16:9) does not match your TV monitor. Audio sound track and/or subtitle language is not the one selected on the SET UP menu. No subtitles. Angle cannot be changed. Playback is not possible. Picture is lightened and darkened alternately.
-
Page 70: Definition Of Terms
Appendix Definition of terms Title “Title” is a unit to divide the contents on a DVD disc. Normally, one title is assigned to one movie. When a disc has two or more titles, they are numbered in sequence as title 1, title 2, etc. -
Page 71: Language Code List
Language code list Enter the appropriate code number for “Menu Language”, “Subtitle Language” and/or “Audio Language” on the SET UP menu. (See pages 47 to 49.) Code Language Name Code 6565 Afar 7089 6566 Abkhazian 7165 6570 Afrikaans 7168 6577 Amharic 7176 6582... -
Page 72: Region Management Information
Appendix Region Management Information (for DVDs only) This DVD/Video CD/CD combi-player is designed and manufactured to conform to the Region Management Information that is recorded on a DVD disc. If the Region number of the DVD disc does not correspond to the Region number of this player, this player cannot play back the disc. -
Page 73: Specifications
Specifications AUDIO SECTION Frequency response DVD (48 kHz Sampling) ... 2 Hz to 22 kHz DVD (96 kHz Sampling) ... 2 Hz to 44 kHz CD, Video CD ... 2 Hz to 20 kHz Harmonic distortion + noise (1 kHz) ... 0.002% or less S/N ratio... - Page 74 YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN Printed in Japan V267970-1 YAMAHA MUSIC AUSTRALIA PTY, LTD.