Progressive Function - (On/Off); Pictures Settings; Selecting The Black Level (U.s.a. Model Only) - Yamaha CINEMASTATION DVR-C300 Owner's Manual

DVD Setup Menu Options
trr m ,
The progressive scan display present 60 complete
frames per seconds, rather than 30 frames per
second of interlaced scanning (ordinary normal TV
system).With nearly double the number of lines,
progressive scan offers higher picture resolution
and eliminates bothersome motion artifacts those
jagged edge on moving objects.
O Press Ai,V to select a setting and press ENTER
(OK) to confirm,
e_o_elect_ . [PERSONAL], proceed to steps
-> The 'PERSONAL PICTURE SETUP' menu
appears.
IMPORTANT!
Before enabling the progressive scan
function, you must ensure:
1)Turn on yourTV progressive scan function (refer
to yourTV owner's manual).
2)You have connected the DVD receiver
to yourTV usingY PBPR (see"Connecting a
Progressive Scan TV" on page 14).
In 'VIDEO SETUPPAGE', press AW to highlight
[PROGRESSIVE], t hen press I_.
OFF
Selectthis to disable progressive scanfunction.
ON
Select this to enable progressive scan function.
Press AW to select a setting and press ENTER
(OK) to confirm.
Follow the instructions shown on theTV to
confirm the selection (if any).
If a blank/distorted TV screen appears, wait for
15 seconds for auto recovery to activate.
This receiver comes with three predefined sets of
picture color settings and one personal setting that
you can define yourself.
In 'VIDEO SETUP PAGE', press AV to highlight
[PICTURE SETTING],then press I_.
STANDARD
Select this for the standard picture setting.
iii!iiiiii!i!| m Hi_ii_i!!_ii/iiiiiiiiii!_¸_¸_¸
O Press AV to highlight one of the following options.
BRIGHTNESS
Increase the value to brighten the picture or vice
versa. Zero (0) is the average setting vaJue.
CONTRAST
Increase the value to sharpen the picture or vice
versa. Zero (0) is the average contrast.
TINT
Increase or decrease the value to change the color
phase of the picture. Zero (0) is the average setting
value,
COLOR
Increase the value to enhance the color in your
picture or vice versa. Zero (0) is the average color
setting value.
O Press _1 I_ to adiust the setting that best suits your
personal preference.
O Repeat steps O-O to adjust other color features
if desired.
Press ENTER (OK) to confirm.
BRIGHT
Select this to make the TV picture brighter:
SOFT
Select this to make the TV picture softer:
PERSONAL
Select this to personalise your picture color by
adiusting the brightness, contrast, tint and color
(saturation).
If you set the TV type to NTSC, set Black level shift
to ON.This will improve the color contrast during
playback.The black level setting has no effect if the
TV type is set to PAL.
ON
Select this to enhance the black level.
OFF
Select this for the standard black level setting.
TIPS: To return to the previous menu, press 41.
To clear the menu, press SET UP.
32