Turning The Progressive Scan Function On/Off - Yamaha DVD-S661 Owner's Manual

Setup Menu
■ The relationship between the setting
of this unit and the TV display
When the aspect ratio of your TV is 4:3:
Playback
Setting
disc
16:9
4:3 PAN
SCAN
4:3
16:9
4:3 LETTER
BOX
4:3
When the aspect ratio of your TV is 16:9
(widescreen):
Playback
Setting
disc
16:9
16:9
4:3
*1: If the disc is not assigned to playback in
panscan, it is played in letterbox.
*2: The side of the picture may be stretched
depending on the TV. In this case, check the
screen size and aspect ratio of your TV.
28
En
TV display
*
1
TV display
*
2
Turning the progressive scan
function on/off
This feature is only available if you have
connected this unit to a progressive scan TV
through the component video jacks (see
"Component video jacks <A>" on page 9).
1
In "VIDEO SETUP PAGE", press 5/a
to highlight [PROGRESSIVE], and then
press 3.
OFF
Select this to disable the progressive scan
function.
ON
Select this to enable the progressive scan
function.
2
Press 5/a to select a setting, and then
press ENTER.
Notes on activating progressive scan:
• Ensure that your TV is equipped with
progressive scan.
• Connect using a component video cable.
• When making HDMI connections, you
cannot select [PROGRESSIVE].
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE
"STANDARD DEFINITION" OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR VIDEO
MONITOR COMPATIBILITY WITH THIS MODEL
525P AND 625P DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line of
Yamaha products, including the projectors
DPX-1300, DPX-830 and the plasma monitor
PDM-4220.