Connecting Fmiam Antennas; Connecting The Power Cord - Yamaha CINEMASTATION DVR-C300 Owner's Manual

Connections
Connecting FM/AM antennas
Fix the claw
into the slot
Ground [GND terminal
For minimum interference, connec[
the antenna GND terminal to a good
earth ground.A good earth ground is
a metal stake driven into moist earth.
AM Loop
Antenna
FMW, re
|l" |_, ,_ Antenna
/;
_.o, , .......
©
_ , _l
_]_ Connect the supplied AM loop antenna to the AM
ANT terminal, Place theAM loop antenna on a
shelf or attach it to a stand or wall,
O Connect the supplied FM wire antenna to the FM
ANT terminal, Extend the FM wire antenna and fix
its ends to the wall.
For better FM stereo reception, connect an
external FM antenna (not supplied).
Connecting the power cord
After everything is connected properly, plug
theAC power cord into the power outlet.
Never make or change any connections with the
power switched on.
Note:
- Refer to the type plate on the rear of the DVD
receiver and subwoofer for identification and supply
ratings.
Notes:
- Adjust the position of the antennas for optimal
reception.
- Position the antennas as far as possible from your7%,
VCR or other sources of radiation to prevent
unwanted interference.
15