Siemens LC 85 K 950 Operating And Installation Instructions page 27

Installation
12. (Exhaust operation) Cut the exhaust
hose to the proper length.
13. (Exhaust hose) Attach and tighten the
exhaust hose, be sure that it is free of
bends.
14. Bend the retaining grooves on the upper
tower outwards approximately 2-3 mm.
15. Slide the upper tower into the retaining
tongue on the tower mount until it clicks
into place.
16. Pull the under tower slightly outwards
and place the upper tower and the
exhaust hood module on it. The
undertower must be touching the hood.
17. Connect the hood to the electricity supply.
en