Siemens LC 85 K 950 Operating And Installation Instructions page 24

Prior to installation
The glass pane must then be placed on
both attachment points. Then the bolts
must be pressed in from the outside and/
or carefully tapped in. For the bolts to be
able to pushed in, the pane must first be
positioned precisely so that the bolts can
be pressed through the attachments
points on the hood.
2
1
1
2
1
2
When installing the bolts, make
absolutely sure that they have been
pushed in completely. If these are not
pushed in completely, the pane could
be damaged by falling out. The falling
glass could caused additional damage
or injuries.
en