Setting The Sleep Timer; Changing The Brightness Of The Display; Restoring To The Factory Defaults - Yamaha M170 Owner's Manual

If you set the sleep timer, this unit automatically turns to
the standby mode after the specified time.
FUNCTION/
FM MODE INFO/TEXT AUTO TUNE ENTER
TIMER
VOLUME
+
–
SLEEP
SLEEP
REPEAT A-B
RANDOM

CHANGING THE BRIGHTNESS OF THE DISPLAY

You can change the brightness of the display.
AUX 1 AUX 2 TAPE
BAND PRESET
d
FUNCTION/
FM MODE INFO/TEXT AUTO TUNE ENTER
TIMER
VOLUME
+
–
SLEEP

RESTORING TO THE FACTORY DEFAULTS

Setting the DEFAULT function resets all options and your personal settings to the factory default.
FUNCTION/FM MODE
NATURAL SOUND CD RECEIVER CRX-M170
POWER TUNING/PRESET/TIME
STANDBY/ON
b/w f/a
TIME TONE/
PHONES MODE BALANCE
PUSH-ENTER
Press and hold down FUNCTION/FM MODE for
more than four seconds in standby mode to
manually initialize.

SETTING THE SLEEP TIMER

DIMMER
MUTE
PROG CLEAR
TIME
CD
TUNER
d
DIMMER
DIMMER
MUTE
FUNCTION
/FM MODE INFO/
BAND TEXT MODE
e
h s
VOLUME
CLEAR
SOURCE
PROGRAM
/MEMORY
Press SLEEP on the remote control repeatedly to
set the duration for the sleep timer (90 to 10
minutes).
You can set the duration in 10-minutes steps.
y
• When the sleep timer is activated, the brightness of the display
goes down.
• To check the remaining time, press SLEEP once. The remaining
time is displayed for three seconds, then the display returns to
the normal display.
Notes
• The sleep timer only works for this unit. It does not turn off
other equipment connected to this unit.
• The sleep timer is canceled if you turn this unit to the standby
mode.
Press DIMMER on the remote control.
Each time you press DIMMER, the brightness of the
display switches between Dimmer on and Dimmer off.
SETTING THE SLEEP TIMER
13