Connecting Antennas; Am Loop Antenna; Indoor Fm Antenna - Yamaha M170 Owner's Manual

RUNNING H/F 1
To enjoy the tuner on this unit, you need to connect AM, FM and DAB antennas to this unit. This product includes an
AM loop antenna, Indoor FM antenna and Indoor DAB antenna. If there is a problem of weak radio wave reception in
your area or you want to improve radio reception, we recommend that you use commercially available outdoor antennas.
For details, consult the nearest authorized YAMAHA dealer or service center.
Indoor FM
antenna
(supplied)
OUT
OUT IN IN OUT IN
AUX 1 TAPE
AUX 2
SUBWOOFER
GND AM ANT
DAB ANT
TUNER
OPTICAL
DIGITAL
OUT
Note
The AM loop Antenna should be placed away from this unit.

AM loop Antenna

1
Attach the antenna stand to the AM loop
antenna.
When attaching the antenna to the wall, you do not
need to use the antenna stand.
2
Press and hold the tab.
8

CONNECTING ANTENNAS

AM loop
antenna
(supplied)
Ground
(GND terminal)
3
Insert the AM loop antenna lead wires into
the AM ANT terminal. Then release the tab.
4
Repeat steps 2 to 3 to insert the AM loop
antenna lead wires into the GND terminal.
5
Extend the cord and place the AM loop
antenna away from this unit and speaker
cables.
While listening to the radio, rotate the antenna head
to find the best angle for reception.

Indoor FM Antenna

1
Connect the supplied indoor FM antenna to
the FM ANT jack on this unit.
2
Place the antenna away from this unit and
speaker cables.
It is recommended to use an outdoor FM Antenna in weak
FM signal areas. In this case, d
antenna.
isconnect the indoor FM