Operating External Units Connected With This Unit - Yamaha EMX-120CD Owner's Manual

OPERATING EXTERNAL UNITS CONNECTED WITH THIS UNIT

CD CHANGER RECEIVER EMX–120CD
PROGRAM
STANDBY/ON
MUSIC
ECHO ECHO
KARAOKE MEMORY
PHONES
DISPLAY MEMORY AUTO/MAN'L
TIME ADJ TIMER
CD
1 2
1 2
6 7
6 7
A B
TIME PROG
MODE
DISC SKIP
CD TUNER
CENTER/REAR
TEST
/DELAY
ECHO
LEVEL
STANDBY/ON
SLEEP
VOLUME
3, 2 2
A/B/C/D/E PRESET/TUNING/BAND
DISC
OPEN/CLOSE CHANGE
1 2 3
DISC DISC DISC
VOLUME
INPUT SELECTOR
CD TUNER
VCR•LD/TV•CD•TAPE/MD•TUNER
MIC TONE MIC MIC MIXING
REPEAT TIME INPUT TRIM
HOUR MIN
NORMAL SOFT MIN MAX
1, 1 1
3,
TUNER
3 4 5
3 4 5
8 PRESET
8 9 0
C D E
+
I0
REPEAT RANDOM OPEN/CLOSE
STOP PLAY/PAUSE
1, 1 1
INPUT
FLAT
KARAOKE MUSIC PROGRAM
DISPLAY
To listen to or watch a source on an
external unit connected with this
unit
1
Select the position of input source (VCR, LD/TV or
TAPE/MD) you will play back by pressing the INPUT
SELECTOR
name appears on the display.
* The names of input sources correspond with the
names of terminals to connect with external units on
the rear of this unit.
2
Play back the source.
(For a video source, turn on the monitor TV.)
3
Adjust the volume to a desired level by using the
VOLUME control.
If you prefer, use the graphic equalizer and/or the sound
field processor built into this unit.
2 2
To record a source to tape
Not only a source played back on this unit, but also a source
played back on an external unit can be recorded by the tape
deck, VCR, MD recorder, etc. connected with this unit.
1 1
Select the source you want to record by using the INPUT
SELECTOR buttons.
2 2
Play back the source and then turn the VOLUME control
up to confirm the input source.
3 3
Begin recording on the tape deck or VCR etc. connected
with this unit.
Note
Only when a karaoke mode is selected and one or two
microphone(s) are connected to this unit, you can record
your vocal input from the microphone(s) along with the
source onto a tape (or MD) by using the tape deck, VCR, etc.
connected to the TAPE/MD OUT and/or VCR OUT terminals
on the rear of this unit. (Refer to page 39 for details.)
E-29
or button until the corresponding