Yamaha EM-202VCD Owner's Manual page 41

USING SOUND FIELD PROCESSOR
VCD/CD
1 2 3
1 2 3
6 7 8
6 7 8
A B C
TIME PROG
MODE INDEX
2
PREV NEXT
DISC SKIP
LEVEL
CENTER/REAR
TEST FLAT
1 /DELAY
ECHO/
KEY
MUSIC PROGRAM USER
POWER
SLEEP
VOLUME
4 5
4 5
PRESET
9 0
D E
+
I0
TUNER
OPEN/CLOSE
RETURN SELECT
INPUT
TIME INDEX
INTRO DIGEST
DISPLAY
Adjusting CENTER LEVEL
If desired, you can adjust the sound output level of the center
speaker even if the output level is already set in "SPEAKER
BALANCE ADJUSTMENT" on page 12–13.
Control range : +10 to –21
1
Press the CENTER/REAR/DELAY selector button once or
more so that "CENT" appears on the display.
2
By continuously pressing the LEVEL control + or – button,
the level value changes continuously.
Notes
This adjustment can be made only when the sound field
program DOLBY PRO LOGIC or DOLBY 3 STEREO is
selected.
Once the output level is adjusted, the level value will be
the same in the DOLBY PRO LOGIC and DOLBY 3
STEREO programs.
If the center channel mode is in the "PHANTOM" position,
the sound output level of the center speaker cannot be
adjusted. This is because in this mode, the center sound
is automatically output from the left and right front
speakers.
Adjusting REAR LEVEL
If desired, you can adjust the sound output level of the rear
speakers even if the output level is already set in "SPEAKER
BALANCE ADJUSTMENT" on page 12–13.
Control range : +10 to –21
1
Press the CENTER/REAR/DELAY selector button once or
more so that "REAR" appears on the display.
2
By continuously pressing the LEVEL control + or – button,
the level value changes continuously.
Notes
This adjustment can be made when a sound field program
except DOLBY 3 STEREO is selected.
Adjustment can be made to DOLBY PRO LOGIC, HALL
and ARENA individually.
E-33