Set Up The Crw3200Ix Drive On Windows - Yamaha CRW3200IX Series Owner's Manual

Preparing the CRW3200IX Drive (Windows)

Set Up the CRW3200IX Drive on Windows

Note
Place the CRW3200IX drive horizontally.
1
Remove all IEEE1394 devices connected to the computer, and
turn on the computer.
2
Be sure that the power switch on the rear panel of the
CRW3200IX drive is turned off (STANDBY), and connect the
included AC adapter to the DC-IN connector of the drive.
The arrow on the adapter plug faces to the screw (the left side of the
connector).
11
DC-IN connector
Screw Arrow