Yamaha CC-50 Owner's Manual page 19

COMPACT DISC PLAYER OPERATION
TUNER DIRECT
1 2 3 4 5
1 2 3 4 5
6 7 8
6 7 8 9 0
A B C D E
+
TIME PROG TAPE EDIT I0
STOP PLAY/PAUSE CD
REPEAT PRESET A/B/C/D/E TUNER
DOWN UP
RANDOM PLAY STOP PLAY TAPE
DECK REC/PAUSE PHONO/AUX
A/B
EFFECT LEVEL DSP MODE SP/PHONES
- +
POWER SLEEP DISPLAY VOLUME
- +
TUNER DIRECT
1 2 3 4 5
1 2 3 4 5
6 7 8
6 7 8 9 0
E
+
I0
Direct operation
Even when an input source other than CD player is selected,
pressing the play/pause button, a track number input button
or the RANDOM play button, or pressing the front edge of the
disc table gently will start playback directly. In this case, if
the tape deck is playing back a tape, it will be stopped
automatically.
* These ways of playback can also be used to close the disc
table. If the table is closed in these ways, playback will
begin automatically, however, the display will not show the
total number of tracks and the total playing time of the disc.
Precautions
•
If TV or radio interference occurs during CD player
operation, move the unit away from the TV or radio.
•
Subjecting the unit to shock or vibration can cause
mistracking.
•
Playing some compact discs at high volume can cause
mistracking. In this case, listen at lower volume.
•
Do not push the disc table while it is moving.
•
If the power fails while the table is open, wait until the
power supply returns or gently push the table manually to
close it.
•
The temperature range for playing compact discs is
recommended to be 5°C (41°F) – 35°C (95°F).
Direct-selection play
By using the track number input buttons on the remote
control transmitter, any track you wish to listen to can be
played directly.
Use the track number input buttons to select the desired
track number. Play will begin automatically.
A. For example, to choose selection 5
Press the "5" button.
B. For example, to choose selection 12
(1) Press the "+10" button.
(2) Within 3 seconds, press "2" button.
C. For example, to choose selection 20
(1) Press the "+10" button.
(2) Within 3 seconds, press the "+10" button again.
(3) Within 3 seconds, press the "0" button.
Note
A track number higher than the number of tracks on the disc
cannot be selected. Also, if a higher track number is selected
while the disc table is open, play will begin from the last track
on the disc when the disc table is closed.
E-17