Yale 400 4400 Hardware Manual page 35

ELECTRIFIED CLOSERS
4200 SERIES MULTI-POINT ELECTROMECHANICAL CLOSER/HOLDER RELEASING DEVICE
Combines electromechanical door holder with 400 Series door closer.
• U.L. listed: 4200MPD listed for application on labeled fire/smoke doors.
4200MP, MPS, and MPD listed for application with any compatibly labeled or
listed fire and smoke detection equipment
• Fail Safe: Solenoid will de-energize. Closer/Holder will operate as a normal
door closer
• Wiring Options: Accommodate either surface or concealed wiring
• Handed
• 2-year warranty
Units with Integral Smoke Detectors Feature:
• Dual chamber ionization sensing
• Alarm (relay) contacts
• Trouble (relay) contacts
• 4290 Series Multi-Point overhead concealed without integral smoke detection
• Available with Radio Frequency Release (RFI)
• Operating voltage - 120VAC or 24VAC/VDC
400 SERIES POWER TRACK
• Incorporates solenoid-actuated cam that locks arm slide in track at selected
Hold Open point. Power holds door at the selected single Hold Open point.
Interruption releases arm slide and door closes. Release manually by pushing
toward closed direction.
• Closer mounted on door. Power Track mounted on frame face or frame soffit
and is non-handed for most applications. Single Hold Open selectable by
adjusting telescoping arm. Hold Open range is 85° - 110°. 2-year warranty.
Units with Integral Smoke Detectors Feature:
• Dual chamber ionization sensor
• Red LED "Alarm"
• Green LED "Power-On"
• Operating voltage - 120VAC or 24VAC/VDC
Condensed Catalog
® CLOSER/HOLDER RELEASING DEVICE
Page 35