Icmp(-X) Device Certificate - Barco Athena Installation Manual

Image 8-16
1 Power / Error LED
2 Ready LED
Status overview PWR/ERROR and READY LEDs:
PWR/ERROR
Off
Red
Blinking Green
Blinking Green Blinking Orange
Blinking Green
Blinking Green Blinking Yellow
Blinking Green
Green Blinking Green
Green
Green
Blinking Red
Green Blinking Orange
Orange

8.8 ICMP(-X) device certificate

Purpose of the Barco ICMP(-X) device certificate
The device certificate (*.pem) of the Barco ICMP(-X) is a digital certificate signed by Barco which is required
when ordering the KDM 2 to play a DCP that is ingested on the ICMP(-X). The device certificate is stored inside
the ICMP(-X) and on a web server.
The (WEB) Commander or Communicator can be used to retrieve the device certificate directly from the ICMP
(-X). To retrieve the device certificate from the website the QR (Quick Response) code can be used. See
procedure "Obtaining the Barco ICMP(-X) certificate", page 73.
2: For China mainland LDM is used next to KDM. LDM specifies also a maximum number of shows.
1
2
ICMP(-X) Status
READY
Off Turned off
Off Board reset or FIPS error
Off Boot loader
Operating System start up
Orange Security Manager - Image Integrity tests
Security Manager - Self Test
Yellow Security Manager - FPGA self-test
Starting Applications
Green Applications started in normal mode
Orange Applications started in degraded mode
Off FIPS error
Update ongoing
Orange Update done
ICMP(-X)
R5906790 /04 Athena 71