Paper Tray Settings
This section includes:
Selecting Tray 1 Mode
■
■
Setting the Duration for the Tray 1 Prompt
■
Selecting Tray 2-N Mode
■
Setting the Duration for the Tray 2–N Prompt
■
Changing the Load Paper Timeout
■
Printer Security
on page 4-15
Note:
For information about selecting options for specific copy, scan, and fax functions, see
Copying, Scanning, or
Faxing
■
www.xerox.com/office/8560MFPsupport
■
www.xerox.com/office/8860MFPsupport
Selecting Tray 1 Mode
The Tray 1 Mode setting specifies:
■
How Tray 1 paper type and size are determined when you load paper in the tray but do not
select the paper type and size on the control panel.
■
When Tray 1 is used for print jobs.
Setting
Dynamic
(Factory default setting)
Static
Automatic
To select the Tray 1 mode setting, use one of the following options:
■
The printer's control panel
■
CentreWare IS
Phaser® 8560MFP/8860MFP Multifunction Printer
on page 4-9
on page 4-11
on page 4-12
on page 4-13
on page 4-14
in the User Guide at:
(Phaser 8560MFP Printer)
(Phaser 8860MFP Printer)
Description
Uses the settings from the next print job that prints from Tray 1 to
■
determine the paper size and type.
Printer will print from Tray 1 when specified in the print job or when no
■
other tray has the job's requested paper size and type.
The paper size and type already set for Tray 1 stay in effect.
■
Printer will print from Tray 1 when specified in the print job or when no
■
other tray has the job's requested paper size and type.
Uses the settings from the next print job that prints from Tray 1 to
■
determine the paper size and type.
Printer will print from Tray 1 when paper is loaded, unless a different
■
tray is specified in the printer driver.
4-9
Printer Settings