Loading Paper In The Manual Feed Slot - Xerox PHASER 6500 User Manual

4. Insert all paper face up and top edge at the front of the paper tray.
Notes:
• Do not force the paper into the tray.
• Be careful not to bend the paper.
p6500-009
5. Slide the paper width guides until they rest lightly against the edge of the paper stack.
6. Insert the tray back into the printer until it stops.
CAUTION:
the printer.
See also:
Setting Paper Types and Sizes

Loading Paper in the Manual Feed Slot

Use the manual feed slot for a wide range of media including:
• Plain Paper
• Letterhead
• Lightweight Cardstock
• Heavyweight Cardstock
• Lightweight Glossy Cardstock (Coated 2 and Coated 3)
• Heavyweight Glossy Cardstock
• Colored Paper
• Labels
• Envelopes
• Special
For a more complete list of paper types and sizes usable in the Manual Feed Slot, see
on page 48.
To avoid problems during printing, follow these guidelines:
• Use several sheets of the paper only when adjusting the paper width guides.
• Holding the paper on both sides, slowly and evenly insert the paper into the printer.
• If the paper looks skewed after the printer pulls it in, gently remove the paper and reseat it. Then
press the OK button or wait for the automatic calibration to start.
Be careful not to use excessive force on the tray. Doing so could damage
on page 58
p6500-010
Supported Paper
Phaser 6500 Color Laser Printer
User Guide
Printing
53