Xerox PHASER 6500 User Manual page 134

Troubleshooting
7. Remove the imaging unit:
CAUTION:
spill from it.
CAUTION:
minutes. Prolonged exposure to light can damage the unit. Cover the imaging unit
while it is exposed. Do not touch the shiny blue transfer belt unit. For details, see
Internal Components
a. Turn the four peach-colored twist-locks to the left to unlock the imaging unit.
b. Grasp the imaging unit by its peach-colored pull tabs on the top edge and then pull the unit
forward and up out of the printer.
c. Place the imaging unit on a flat surface and cover it with a sheet of paper to minimize its
exposure to light.
8. Using a clean, dry, lint-free cloth or swab, clean all debris from the laser lens.
9. Check for and remove any debris around the imaging unit gears located on the left side of the unit.
134 Phaser 6500 Color Laser Printer
User Guide
Do not drop or shake the imaging unit after removal because toner can
Do not expose the imaging unit to any light source for more than five
on page 19.
p6500-025
p6500-026
p6500-042