Download Print this page
Clarke OBS-18DC Operation?And Safety

Clarke OBS-18DC Operation?And Safety

Orbital sander
Hide thumbs Also See for OBS-18DC:

Advertisement

Quick Links

Safety Practices:
Sanding dust is flammable!
Empty and clean dust bag
when not in use.
Always wear safety
goggles, protective
clothing, and a dust mask
while sanding.
Keep the dust bag
emptied. Dust generated
from sanding wood floors
can spontaneously ignite
or explode. Promptly
dispose of any sanding
dust in a metal container
clear of any combustibles.
Do not dispose in a fire.
Keep the work area well
ventilated.
Sanding/finishing wood
floors can create an
explosive or combustible
environment. Do not
operate this machine
around solvents, thinners,
fuels, floor finishes, or any
other flammable materials.
Keep hands, feet, and
loose clothing away from
all moving parts on the
machine.
Disconnect the power cord
before replacing the pad or
the abrasive.
Never leave the machine
unattended while it is
connected to a power
source.
www.clarkeus.com/rental
OBS-18DC Orbital Sander
Operation and Safety
Application: Wood flooring maintenance and light restoration work,
especially small projects that do not require a more aggressive tool.
This tool is well suited for use on parquet floors.
Set-up and operation
Follow the steps listed below to complete a floor sanding project safely.
Step
Prepare the room:
Step
1
Countersink any nails in the flooring.
1
2
Tape over electrical outlets.
3
Cover doorways and windows with plastic.
Cover all air vents in the room (intake and
4
output vents).
Attach sandpaper (36 grit)
to the buffing pad. The
adhesive backing on the
2
sandpaper sticks to the pad.
Be sure the power cord is
unplugged any time you are
changing sandpaper.
Connect the power cord to a 3-prong outlet. Always
3
make sure the ON/OFF switch (interlock) is in the OFF
position when connecting power.
Position the power cord safely out of the way of the
4
machine by looping a section of cord through a side belt
loop.
Release the handle by
pressing up on the locking
5
lever. Bring the handle to a
comfortable position. Do not
lock the handle. Locking
the handle will prevent the
machine from resting easily
on the pad.
Action
Action

Advertisement

loading

Summary of Contents for Clarke OBS-18DC

  • Page 1 OBS-18DC Orbital Sander Operation and Safety Safety Practices: Application: Wood flooring maintenance and light restoration work, especially small projects that do not require a more aggressive tool. Sanding dust is flammable! This tool is well suited for use on parquet floors.
  • Page 2 OBS-18DC Orbital Sander Step Action Questions or Problems? Contact Clarke Start the sander: Technical Service at Step Action 800-356-7274. Stand directly behind the sander. Grip one or both of the control levers securely. Need more Press the Interlock button. information?