Using The Web Interface - QTS AN-X2-ABDHRIO User Manual

30
Page AN-X2-ABDHRIO Remote I/O Drive Interface
The AN-X module contains a webserver capable of communicating with standard web
browsers such as Internet Explorer.
Use the web interface to:
•
•
•
•
It also contains contact information for support.
To use the web interface, you must know the IP address of the AN-X. To access the web
interface, start your web browser and type the AN-X IP address where you normally
enter web addresses in the browser.
The left pane contains commands. Click on the arrows at the left of the main headings to
expand or contract the sections.
The contents of the right pane depend on the current command being executed.
TIP
configure the remote I/O and data mappings
view the current configuration
view AN-X logs
perform administrative functions
Browsers may return cached data rather than rereading data that has
changed on the AN-X.
February 2013

Using the Web Interface