PRODUCT DESCRIPTION Omega Air Actuated Hydraulic Bottle Jack with wheels is designed for lifting, but not sustaining, loads ranging up to 20 tons. After lifting, loads must be immediately supported by appropriate means. It is suitable for use in an appropriately rated and designed vertical or bench press structure.
Figure 1 - Model 18207 Nomenclature 6. Raise load to desired height, then immediately transfer the load to appropriately rated support devices such as jack stands.
Lowering Adding oil 1. Raise load enough to carefully remove jack stands. 1. With saddle fully lowered and release valve open, 2. Insert handle onto release valve and slowly turn set jack in its upright, level position. Remove oil filler handle counter-clockwise, but no more than 2 full screw.
• • Overload condition Remedy overload condition pressure • • Hydraulic unit malfunction Contact Omega Tech. Service • Ensure load is removed, then drain fluid • Reservoir overfilled Jack will not lower after unloading to proper level • Fluid level low •...
SFA Companies, 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. Tel:(888)332-6419 Fax:(816)891-6599 E-Mail: sales@omegalift.com Omega Website: http://www.omegalift.com Model # 18207 Part No. Description Quantity handle assembly air hose air motor wheel plate return spring oil filler screw label (s) (not shown) manual (OIPM#18207-ABJ3) Figure 2 - Model 18207 Replacement Parts Illustration...
Page 7
Notes SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. Tel:(888)332-6419 Fax:(816)891-6599 E-Mail:sales@omegalift.com Omega Website: http://www.omegalift.com...
Page 8
Notes SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153, U.S.A. Tel:(888)332-6419 Fax:(816)891-6599 E-Mail:sales@omegalift.com Omega Website: http://www.omegalift.com...