Xerox DocuPrint 92C NPS Maintenance Guidance page 44

WASTE CONTAINERS
6-2
To replace the waste container:
1. Open the printer doors and locate the dry ink cartridge at the
left side of the printer. The developer waste container is located
under the color dry ink bottle.
2. Spread a dropcloth on the floor under the developer waste
container area.
3. Hold the container by the tab on the top. Lift the container up
approximately half an inch, then pull it out of the printer. Let the
tab-end of the container touch the floor, then grasp the
container by the handle. Note that a full container weighs
approximately 8 pounds/3.6 kg.
4. Use the cap from the new container to recap the old container.
XEROX DOCUPRINT 92C NPS GUIDE TO PERFORMING ROUTINE MAINTENANCE