Input/Output Settings - Boss RC-500 Owner's Manual

Input/Output Settings

Here's how to make settings such as phantom power on/off, and settings related to the input and output jacks.
For details on the parameters, refer to "Parameter Guide" (PDF).
1. Press the [INPUT] button.
The editing screen for input/output settings appears.
J
PHANTOM
OFF
2. Turn the [MEMORY/VALUE] knob to select the
parameter that you want to edit, and press the
[MEMORY/VALUE] knob.
MIC IN
J
OUT-A&B
3. Turn the [MEMORY/VALUE] knob to change the
value, and press the [MEMORY/VALUE] knob.
4. Repeat steps 2–3 to edit the parameter that
you want.
5. Press the [INPUT] or [EXIT] button to return
to the play screen.
Parameter
Value
Settings for the Entire RC-500
Parameter Explanation
Turns phantom power on/off.
NOTE
Always turn the phantom power off
PHANTOM
when connecting any device other than
condenser microphones that require
phantom power.
Specifies the output destination of the
MIC IN
audio that is input to the MIC IN jack.
Specifies the output destination of the
instrumental sound that is input to the
INST IN
INST IN (A/MONO, B) jacks.
Specifies the output destination of the
RHYTHM
rhythm sound.
Specifies the depth of the noise
suppressor that's applied to the audio
MIC IN NS
input from the MIC IN jack.
Specifies the depth of the noise suppressor
that's applied to the instrumental sound
INST IN NS
input from the INST IN (A/MONO, B) jacks.
Specifies the input/output that is shown
PEAK SRC
by the INPUT indicator.
17