Xerox DocuPrint 4090 IPS Troubleshooting Manual page 41

Troubleshooting Guide
Take care not to touch any parts in this area. They may be
hot enough to cause burns.
2. With your left hand, move and hold the green latch to the right
(the direction of the arrow marked on it). With your right hand,
pull out the large green handle until the fuser unit latches in
the fully open position.
3. Raise the small green handle at the front of the fuser
assembly.
Do not use a sharp object to remove paper wrapped around the
fuser rolls. Attempting to do so could damage the roller and
require its replacement.
4. Remove and discard any paper you find in this area.
5. Return the small green handle to its original position.
6. Push down on the green release latch, and slide the fuser
unit back into the printer until it latches into the closed
position.
Clearing paper misfeeds and jams
WARNING
CAUTION
4-17