Xerox DocuPrint 4090 IPS Troubleshooting Manual page 29

Troubleshooting Guide
2. Lightly moisten a lint-free towel with film remover and
thoroughly wipe the outside surface of the feed belt in the
same direction as the ribs on the belt. (Wiping from side to
side might pull the belt off its track.) Allow a few seconds for
the film remover to evaporate.
3. Latch the paper feeder assembly by pressing down on the
bright green dot. Slide the paper tray completely back into the
printer
Operate the system as usual. If you continue to experience
misfeeds, place a service call.
Clearing paper misfeeds and jams
4-5