Table of Contents
Advertisement
SCPI Error Messages
−274
Macro parameter error
Indicates that the macro definition improperly used a macro parameter placeholder
(see IEEE 488.2, 10.7.3).
−275
Macro definition too long
Indicates that a syntactically legal macro program data sequence could not be
executed because the string or block contents were too long for the device to handle
(see IEEE 488.2, 10.7.6.1).
−276
Macro recursion error
Indicates that a syntactically legal macro program data sequence could not be
executed because the device found it to be recursive (see IEEE 488.2, 10.7.6.6).
−277
Macro redefinition not allowed
Indicates that a syntactically legal macro label in the *DMC command could not be
executed because the macro label was already defined (see IEEE 488.2, 10.7.6.4).
−278
Macro header not found
Indicates that a syntactically legal macro label in the *GMC? query could not be
executed because the header was not previously defined.
−280
Program error
Indicates that a downloaded program-related execution error occurred. This error
message should be used when the device cannot detect the more specific errors
described for errors −281 through −289.
NOT E
A downloaded program is used to add algorithmic capability to a device. The syntax
used in the program and the mechanism for downloading a program is device-
specific.
−281
Cannot create program
Indicates that an attempt to create a program was unsuccessful. A reason for the
failure might include not enough memory.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
8-31
Advertisement
Table of Contents
