Crosley CRH10SW User Instruction page 10

REINSTALLATION
1. Take a new bottom hinge from the user manual bag. Align the holes in the bottom
hinge to the corresponding holes on the left side of the cabinet. Insert and tighten
the screws. Reinstall both front feet. Install the short leveling leg on the left side, and
the long leveling leg on the right side.
2. To install refrigerator door: Line up the left bottom hole of the refrigerator compartment
door over the bottom hinge pin. Move door forward to make it straight and align with
bottom hinge. Ensure the door is aligned horizontally and vertically so that the seal are
closed on all sides before finally installing and tightening the middle hinge. Install and
tight the middle hinge again, and turn the hinge axle until it completely enters the door
body. Secure it with the screws.
3. To install freezer door: Line up left bottom hole of the door over the middle hinge
middle pin. Move door forward to make it straight and align with freezer compartment.
Ensure the door is aligned horizontally and vertically so that the seal are closed on all
sides before finally tightening the top hinge. Take the new upper hinge from the user
manual bag, turn the hinge axle until it completely enters the door body. Screw the top
hinge.
4. Install the top cover, and screw it to the top of unit.
Fig 5