Table of Contents
Advertisement
7.2 Establishing factory settings
Building Technologies
Fire Safety
All existing settings are deleted and reset to the factory settings. The radio manual
call point FDM275-O can only be integrated into a radio cell as a new device if it is
set to its factory settings.
1
Figure 13: Establishing factory settings
1 Switching unit (rear view)
2 Battery pack BAT3.6-10
NOTICE
Unintentional alarm activation
Removing the glass or plastic insert triggers an alarm if the detector line is
activated.
Switch off the detector line or switch it to maintenance mode.
Maintenance / Repair
Establishing factory settings
2
4
3 'new' opening with button
4 Pen or pencil
7
3
35 | 46
A6V10425652_en--_f
2016-11-28
Advertisement
Table of Contents
