Mounting and installation
5
Installing the protective cover
5.4 Installing the protective cover
30 | 46
Building Technologies
Fire Safety
If a protective cover (accessories) is being used, proceed as described below:
w The radio manual call point has been installed and electrically connected. See
the chapter 'Installation [
w A compatible protective cover is available. See the chapter 'Protective cover
FDMC295'.
Snap the protective cover FDMC295 (2) into place in the recesses in the
l
housing cover (1) intended for this purpose. See also 'Protective cover
FDMC295' chapter.
a The protective cover is installed.
2
Figure 9: Installing the protective cover FDMC295
1 Radio manual call point FDM275-O
26]'.
1
2 Protective cover
A6V10425652_en--_f
2016-11-28