Setup; Safety Information - Invacare Softform Premier Active 2 User Manual

4 Setup

4.1 Safety information

WARNING!
Electrical shock hazard!
– Do not remove control unit cover.
– Refer to qualified service personnel.
– Before performing any maintenance to the control
unit, disconnect the power lead from the wall outlet.
– Do not insert items into any openings of the control
unit. Doing so may cause fire or electric shock by
shorting the internal components.
– The control unit must be kept away from all heat
sources and radiators during operation.
– Connect the equipment to a two or three prong wall
outlet using the five meter power lead provided with
the product.
– Position the device ensuring that access to the
connections on the device are not obscured and has
ease of access.
WARNING!
If this equipment is modified, appropriate inspection and
testing must be conducted to ensure continued safe use
of the equipment.
– Do not modify this equipment without authorization
of the manufacturer.
1576248-C
WARNING!
Risk of entrapment!
Patient entrapment with the bed side rails may cause
injury or death. A thorough patient assessment should
be completed and monitored and the equipment should
be used as specified and maintained to reduce the risk
of entrapment. Variations in bed rail dimensions, and
mattress thickness, size and density could increase the
risk of entrapment.
– Mattress must fit bed frame and side rails to prevent
patient entrapment. Follow the bed manufacturer's
instructions.
– After any adjustments, repair or service and before
use, make sure all attaching hardware is tightened
securely. Rails with dimensions different from the
original equipment supplied or specified by the bed
manufacturer may not be interchangeable and may
result in entrapment or other injury.
Setup
9