Control Unit Menu Display - Invacare Softform Premier Active 2 User Manual

Invacare® Softform® Premier Active 2 and Active Care

5.4 Control unit Menu Display

Task
1. Power up
2. Menu option
3. Power down
14
Action
Push main switch of control unit.
Cannot enter menu.
1. Move control unit switch to off position
(See figure above).
2. Disconnect from power source.
A LCD display screen
B Up arrow button
C
OK button / Silence alarm
D
Down arrow button
E
Green LED light
Display
3 audible beeps.
LCD A illuminates. (see figure above)
Green light E illuminates. (see figure above)
"System set up" displayed on LCD display.
After 10 minutes "System OK" displayed on LCD display.
The menu can only be served after the system has gone
through full cycle set up and "System OK" is displayed on the
LCD display.
Wait until set up is complete "System OK".
System OK can take up to 15 minutes to complete cycle.
The LCD display and the green LED go out.
1576248-C