Xerox WorkCentre Pro 421 User Manual page 67

½
Use the scroll key
select the setting you wish to
change and press [Enter].
½
Select the changes required
and press [Enter].
½
The [Setting] screen is
displayed again. Use the
scroll key to select
[Done] and press [Enter].
½
Repeat the steps above for
each section of the job.
½
After the last page/section
has been scanned, use the
scroll key to select [End
build job] and press [Enter].
½
Enter the quantity required
and press [Start].
The machine will complete the
quantity selected.
WorkCentre Pro 421 User Guide
to
Setting
Done
Lighten/Darken : Auto
Edge Erase
Build Job
Scan next page
End build job
Change current settings
: Off
1
1
3-29