Xerox WorkCentre Pro 421 User Manual page 41

½
Remove all staples and paper
clips before placing the
originals into the document
feeder.
½
If necessary, adjust the sliding
guides to the paper size
required.
½
Insert the originals neatly into
the document feeder, face up.
The first page should be on
top with the headings towards
the back or left of the
machine.
½
Align the stack with the left
and rear edges of the
document feeder tray and
adjust the guides to just touch
the front and rear edges of
the originals.
WorkCentre Pro 421 User Guide
Sliding
guides
When Auto Paper is selected, the document feeder senses the
size and orientation of the originals, it then checks the paper
trays to find one that corresponds.
NOTE: Auto Paper is used with standard original sizes. For
non-standard sizes, manually select the paper tray required.
3-3