Cupboard Door Preparation - AEG L7FE7261BI User Manual

16 www.aeg.com
M
N
O
y
x
y
16-22 mm
Ø 35 mm
12,5 - 14 mm
N
O
M
449
mm
22±1,5 mm
595-598 mm
If the cupboard door has to be opened from
left to right, invert the position of the hinge
supports M with the magnetic plate N and
lower plate O.
Make sure that the plate with
magnet is on the upper
position.

Cupboard door preparation

For countersinking the door, it
is recommended to call a
professional.
Align the cupboard door to the furniture
correctly.
Measure the distance X to fix the height of
the hole to countersink the upper hinge. The
centre of the hole Y should be at the same
height of the stroke on the hinge support.
Set the position of the lower hole respecting
dimensions and distances shown in the
drawing (449 mm).
Countersink the holes.