Table of Contents
Advertisement
As the blades wear, shims located in the stack outside of the
impeller can be transferred behind the impeller. This will move
the impeller further down into the tapered liner to reduce the
clearance.
Check the impeller clearance by sliding a feeler gauge through
the intake grate and measure the clearance between the impeller
edge and liner.
Alternator Belt Inspection
Inspect the alternator belt and have it replaced by an authorized
dealer if any of the following conditions are found:
•
Cracks or deterioration in the rubber portion of the belt.
•
Belt surfaces rough or uneven.
•
Signs of wear on edges or outer surfaces of belt.
MAINTENANCE
a
b
29080
74
a -
Shims
b -
Clearance between
impeller edge and liner
29398
eng
Advertisement
Table of Contents
