Next steps
1. Replace the
optical drive assembly
2. Replace the
SD memory card
3. Follow the procedure in
Memory modules
Removing the memory module
Prerequisites
1. Follow the procedure in
2. Remove the
SD memory card
3. Remove the
optical drive assembly
4. Remove the
base cover
5. Disconnect the
battery
Steps
1. Pry the clips securing the memory module until the memory module pops-up [1].
2. Remove the memory module from the memory module slot [2].
Installing the memory module
Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle [1].
3. Press the memory module down until the clips secure it [2].
22
Removing and installing components
after working inside your computer
before working inside your computer
cable from the connector on the system board.