Table of Contents
Advertisement
14
•
•
•
Power Management - A "Monitor Saver," turns off the video signal to the monitor,
allowing the monitor to enter a power-saving mode after a designated idle time.
Parameters for this mode are available by right-clicking on the desktop background
and selecting Properties | Screen Saver | Power.
Wake-on-LAN - This standard XP feature allows the Rapport Administration Software
to perform image updates and remote administration functions at any time. The
terminal power must remain plugged-in for this to work.
Terminal Time - After power off, clock time will not be lost as long as the power source
remains plugged in. Clock time will be lost, however, if the power source is unplugged
and the battery option is not installed. The local time utility may be set to synchronize
the terminal clock to a time server automatically at a designated time or manually.
Note
Correct time should be maintained because some applications may require
access to local terminal time. The Date and Time Properties dialog box may
be opened by clicking on the time area in the task bar or by double-clicking
on the Date and Time icon in the Control Panel.
Advertisement
Table of Contents
