Table of Contents
Advertisement
Quick Links
Commercial Mower Owner's Manual
WARNING: READ THIS MANUAL BEFORE USING
For your safety and for proper operation and maintenance read
carefully and keep readily available for future reference.
Additional replacement owner's manuals as well as illustrated parts lists are available from your
authorized Wright Dealer for a nominal charge. Also check
to date literature. Please indicate the complete model number and serial number of your Wright
product.
For reference please note the following information at the time of purchase:
Wright Manufacturing Inc.
For Stander RH serial #28551 and higher until superseded
Revised 06/2007
SERIAL # ________________________________
MODEL # ________________________________
DATE OF PURCHASE ______________________
www.wrightmfg.com
for the most up
Advertisement
Table of Contents
Related Manuals for Wright Manufacturing Stander RH 28551
Summary of Contents for Wright Manufacturing Stander RH 28551
- Page 1 Please indicate the complete model number and serial number of your Wright product. For reference please note the following information at the time of purchase: SERIAL # ________________________________ MODEL # ________________________________ DATE OF PURCHASE ______________________ Wright Manufacturing Inc. Revised 06/2007 www.wrightmfg.com for the most up...
- Page 2 ©1998-2006 Wright Manufacturing, Inc. All rights reserved. This material may not be reproduced or copied, in whole or part, without written permission from Wright Manufacturing, Inc. Grass Gobbler, Gobbler, Leaf Gobbler, Velke, Pro 1, X2, Stander,...
-
Page 3: Table Of Contents
PRE-DELIVERY SERVICE OF MOWER BY DEALER... 1 SAFETY INSTRUCTIONS... 3 ... 3 NTRODUCTION ENERAL AFETY NSTRUCTIONS ... 3 WNER OTICE ... 3 UALIFICATIONS ... 4 LOTHING NSPECT OWER EFORE EGULAR OWER AFETY ONDITIONS NITIAL PERATING AFETY PERATION ORWARD ... 6 PERATION EVERSE ADIUS... - Page 4 * * This Page Intentionally Left Blank * *...
-
Page 5: Pre-Delivery Service Of Mower By Dealer
Pre-Delivery Service of Mower by Dealer WARNING The Wright Stander RH is shipped completely assembled and has been adjusted and tested at the factory. However, due to jostling during the shipping process and the delivery time lapse the following items need to be repeated again before starting the mower. After you have uncrated the mower, follow these procedures in the order indicated: •... - Page 6 Wright Manufacturing Distributor. The limited warranty is not valid unless the mower is registered and all of the above steps are taken. Remember, the purchaser is both your and our customer and his satisfaction is very important.
-
Page 7: Safety Instructions
SAFETY INSTRUCTIONS WRIGHT MOWER USERS & OWNERS: READ THIS MANUAL BEFORE USING WARNING This symbol with the word “WARNING” indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Introduction This mower is built to the highest standards in the industry. -
Page 8: User Clothing
WARNING User Clothing DO NOT operate the mower while wearing sandals, tennis shoes, sneakers, or shorts. Always wear long non-baggy pants. Wear high- top leather steel-toed work boots with thick, textured tread, soft-rubber soled at all times. Hard or smooth soled shoes are too slippery for a good footing on mower platform. -
Page 9: Initial Operating Safety Guidelines
around. When the Wright mower is in use, never direct the grass discharge toward bystanders, traffic, cars or buildings nor allow anyone within 50 feet of the machine while in operation. Thrown objects can pass through glass windows and some walls of buildings. There is extreme risk of danger from thrown objects or being cut by the blades of the mower or being run over if you lose control. -
Page 10: Operation In Reverse
Speeding with any mower is dangerous, and so is traveling faster than conditions should permit on this mower. Sudden stops from excessive speed or falling off the mower may cause serious injury or death. WARNING Operation In Reverse Always keep a firm grip on the mower stationary handlebar with both hands. -
Page 11: Fuel Safety
Replacement Parts Use of parts other than specified parts s Wright Manufacturing, Inc. may compromise the safe use of the mower, are not recommended and their use could void the warranty. Always check with your Dealer or the Wright Mfg website for the latest Illustrated Parts List for your equipment. -
Page 12: Operating Instructions
OPERATING INSTRUCTIONS WARNING Inspect Mower Before Each Use Inspection of Mower : Do not use the mower if any parts are not maintained in good operating condition. Examine all moving parts prior to each use. Look for excessive wear, bald drive tires or worn out front tires (normally smooth), cracks in parts, loose or missing bolts, cotter, linchpin or “hair”... -
Page 13: How To Stop And Park The Mower
speed. Release the parking brake. The higher engine speed will make the controls much more responsive and the mower much quicker; Use caution if it is your first time. Now try moving the hand control levers, one at a time, very slightly, forward and backward. -
Page 14: How To Perform The Tracking Adjustment
Changing the Speed/Sensitivity Adjustment The controls are initially set with the Speed/ Sensitivity Adjustment in the faster, more sensitive position. If an operator is not completely familiar with the mower operation the operator may desire to decrease the ground speed. The slower setting has a corresponding decrease in the sensitivity of the controls. -
Page 15: How To Test/Use The Blade Clutch/Brake Switch
¼” allen wrench at the Return-to-Neutral (RTN) mechanism, if necessary. It is normal to make these adjustments from time to time. How to Test/Use the Blade Clutch/Brake Switch Before testing the blade clutch/brake operation, make sure the area is clear and there is nothing vulnerable to thrown objects from under the mower. -
Page 16: Battery Service
oil fill tube. Use fully synthetic oil: Mobil1 15W- 50. Lift the mower so that the rear wheels are off the ground. Be careful to support the mower so that it will not fall or tip while the system is bled of air. -
Page 17: Maintenance Interval Chart
Maintenance Interval Chart MAINTENANCE ITEM Inspect for cracks in frame, cutter deck or other steel parts Inspect all belts for wear, adjustment and alignment Check all bolts and nuts for tightness (tighten as necessary) Lubricate hand control lever pivot shafts with waterproof grease Check hydraulic oil reservoir level and fill as needed - Use SYNTHETIC oil - Mobil1 15W-50 Grease caster wheel bearings... -
Page 18: Maintenance Record
Maintenance Record Unit Date Maintenance/Service Performed Shop/Technician Hours... - Page 19 WRIGHT MANUFACTURING, INC. POWER EQUIPMENT LIMITED WARRANTY THIS WARRANTY SUPERSEDES ALL PREVIOUS ON UNITS WITH A RETAIL SALES DATE ON OR AFTER 04/01/05 Wright Manufacturing, Inc. (hereinafter: WMI) warrants to the original owner that the new WMI mower accompanying this document will be free from manufacturing defects in materials or workmanship subject to the following limitations and exclusions.
- Page 20 4600X Wedgewood Blvd Frederick, MD 21703 www.wrightmfg.com...