Advanced System Set Up - HITEC RDX2 Mini Instruction Manual

Advanced System Set Up

The system will be set to its default parameters when powered on
for the rst time. The screen displays the following information in
sequence and the user can change any given value on each screen.
To change a parameter value in the program, press START/ENTER
to make that value blink. Next, change the value by pressing INC or
DEC. The value will be stored by pressing START/ENTER once.
ITEM
Safety T imer
O N 120Min
Capacity C ut-Off
O N 5 000mA H
SELECTION
OFF/
ON
1-720 Min
( )
OFF/
ON
(
100-50000 mAh)
DESCRIPTION
When y ou start a charge process,
integral s afety timer automatically
running at t he s ame time. T
programmed to p revent o vercharge
battery i f it p roves to b e faulty, or
termination circuit cannot dete
battery full. The value for the safety
should be generous enough to allow
charge of the battery.
This program sets t he maximum
capacity t hat will be supplied
battery during charge. If the delta
voltage i s not d etected nor t he
timer expired by any reason, t his
will automatically s top the process
selected capacity value.
25