Memory Set And Call Out - HITEC RDX2 Mini Instruction Manual

Memory Set and Call Out

The charger can store up to 10 di erent charge pro les for your convenience, and
the stored pro les can be recalled quickly without having to go through the setup
process. When you are willing to alter the parameter value in the program, press
START/ENTER to make it blink then change the value with INC or DEC. The value will
be stored by pressing START/ENTER once.
Note: All following screen are taking 2S(7.4V) LiPo battery for example.
[BATT MEMORY 1]
ENTER SET ->
START/ENTER button
BATT TYPE
LiPo
◄DEC INC ►
BATT VOLTS
7.4V ( 2S )
◄DEC INC ►
CHARGE CURRENT
◄DEC INC ►
TVC = YOU R RISK
4.20V
◄DEC INC ►
SAVE PROGRAM
ENTER
START/ENTER button.
Enter the battery memory program: 10 Di erent
charge pro les can be stored.
Set the battery type:
Set the voltage and number of cells (2S-4S)
Set the charge current (0.1-5.0A)
4.9A
Set the terminal voltage (4.18 -4.25V):
Press ENTER to save program:
(LiPo/LiHV/LiFe/LiIon/NiMH/NiCd/Pb).
21