Cleaning And Servicing; Troubleshooting - Bosch MaxxiMUM MUMX50GXCN Instruction Manual

en

Cleaning and servicing

Cleaning and servicing
Important information
The appliance requires no maintenance.
Thorough cleaning protects the appliance
from damage and keeps it functional.
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
Cleaning the base unit
W Risk of electric shock!
Never immerse the base unit in water or
place under running water. Do not use a
steam cleaner.
■ Remove mains plug.
■ Wipe the base unit and drive cover with
a damp cloth. If required, use a little
detergent.
■ Then dry the base unit.
Cleaning the bowl and tools
The bowl and tools are dishwasher-proof.
Do not wedge plastic parts in the dish-
washer, as they could be permanently
deformed during the washing process!
Cleaning the blender
W Risk of injury from sharp blades!
Do not touch blender blades with bare
hands. Clean them with a brush.
Warning!
Do not wash blender holder in the dish-
washer or leave it in water.
■ Clean blender holder under running
water.
■ Lid, funnel and blender jug can be
washed in the dishwasher.
Note:
Lid can be disassembled for cleaning.
Figure J:
■ Pull funnel upwards out of the lid.
■ Press insert downwards out of the lid.
24
11_MUMX50GXCN_8001018585_02-ohneZubehör.indb 24
Tip: After processing liquids, it is often suffi-
cient to clean the blender without removing
it from the appliance. Pour a little water and
washing-up liquid into the attached blender.
Switch on the blender for several seconds
(setting M). Pour out the water and rinse out
the blender with clear water.

Troubleshooting

W Risk of injury!
Before eliminating a fault, pull out the mains
plug.
The multi-function arm must be engaged
in each operating position.
Initially try to eliminate the problem which
has occurred with the help of the following
information.
Fault
Appliance does not start.
Remedial action
■ Check the power supply.
■ Check the mains plug.
■ Check multi-function arm.
Correct position? Engaged?
■ Screw on bowl all the way.
■ Attach drive cover to unused drives.
■ The safety lock is active. Switch appli-
ance to 0 and then back to the required
setting.
Fault
Appliance switches off during use. The
overload protection feature has been
activated. Too much food was processed at
one time.
Remedial action
Switch off the appliance and pull out the
mains plug.
■ Leave the appliance to cool down for
15 minutes in order to deactivate the
overload protection.
■ Reduce processing quantity. Do not
exceed permitted maximum quantities
(see "Application examples").
■ Switch on appliance again. If the motor
still does not start, leave the appliance
to cool down for a longer period (at least
1 hour).
14.09.2015 12:37:39