National Instruments VXIpc-486 500 Series Getting Started page 78

VXIpc-486 Model 500 Series Hardware and
Software Configuration Form
Record the settings and revisions of your hardware and software on the line to the right of each item. Complete
a new copy of this form each time you revise your software or hardware configuration, and use this form as a
reference for your current configuration. Completing this form accurately before contacting National Instruments
for technical support helps our applications engineers answer your questions more efficiently.
National Instruments Products
• VXIpc-486 Model 500 Series ID Label Information
– Model Number
– Complete Part Number (including 3-digit suffix)
– Serial Number
– Revision Number
– Fixed Disk Type (See ID label on module cover)
• VXIpc-486 Model 500 Series Configuration Information (see Chapter 2)
– Factory Configuration
If no, give the following information.
VXIbus Slot/External CLK10 Configuration (Table 2-2)
A*
– External Trigger Input Configuration (Figure 2-9)
Unterminated*
– External Audio/Trigger Output Configuration (Table 2-3)
Trigger Out*
• VXIpc-EFD External Floppy Drive
Not Installed
If installed, give the following information
Serial Number
Revision
* Factory Configuration
500 566
____________________________________________
____________________________________________
____________________________________________
____________________________________________
yes
B C
Terminated
Audio Out
Installed
_________________________________________________
_________________________________________________
599
no
D E F