Mounting And Connecting The Brake Relay - Siemens SINAMICS G120 Installation Manual
Power modules, ip20 / push-through technology (pt)
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
8.9.3
Mounting and connecting the brake relay
Installing the Brake Relay
● FSA ... FSC: Install the Brake Relay next to the Power Module.
● FSD ... FSG: Install the Brake Relay at the rear of the lower shield plate. Attach the
Brake Relay before you install the shield plate.
Connecting the Brake Relay to the converter
The connector for the Brake Relay is located at the front of the Power Module. Lay the cable
harness for the Brake Relay in the cable routing.
Power Module PM240-2
Hardware Installation Manual, 01/2020, A5E33294624B AL
Mounting the shield plates (Page 36)
Accessories
8.9 Braking relay
143
Hide quick links:
Advertisement
Table of Contents
