System Recovery; Performing System Recovery - Konftel 800 Installation & Administration

MAINTENANCE
Log in to the phone as the administrator.
On the phone screen, tap
Tap
Factory Reset
The phone shows the following message: Reset configuration to
factory default. Press OK to confirm.
Tap to confirm the reset.
Ok
Optional: Tap
Cancel

System recovery

As an administrator, you can perform system recovery on Konftel 800 to return the
phone to operable state, for example, after a faulty upgrade or when the phone
application fails. System recovery replaces the current firmware with the
previously installed operable firmware version.
You can also perform system recovery to reset the administrator password.
System recovery erases all settings including the account information.

Performing system recovery

Ensure that you save the configuration file from your Konftel 800. System recovery
erases all settings.
Power cycle the phone to start the boot process.
When the LEDs turn green, start tapping the
phone and continue tapping until the LEDs turn off.
Tap the
Microphone Muted
When the LEDs turn red, tap the
recovery.
The LEDs turn off. The phone starts regular boot. After the boot up, the phone
displays the following message: Upgrade the phone to complete
recovery.
If you want to cancel the system recovery, do not tap
the phone when the LEDs turn red.
After the phone boots up, set the administrator password.
Upgrade the phone to complete system recovery.
Upload the configuration file with necessary settings.
Settings > Phone
.
to return to the
button once again.
Volume up
106
.
settings.
Phone
Microphone Muted
button once to confirm the system
button on the
button on
Volume up