Section 2 ► Installation and Setup
2.2 Installation
Proper installation of your projector will ensure the quality of your display. Whether you are
installing a projector temporarily or permanently you should take the following into account to
Considerations
ensure your projector performs optimally.
Choose the installation type that best suits your needs: front or rear screen, floor mount or
Installation Type >
inverted mount.
Front Screen Installations
Screen Type >
in front screen installations the projector and audience are positioned in front of the screen,
which can be flat or curved.
Flat screens are recommended with this projector. They offer a gain of about 1 with a viewing
angle just less than 180°. This type of screen reflects incident light equally in all directions so the
audience can see the display from various angles.
Curved screens have a gain greater than 1 with a viewing angle much less than 180°. This type
of screen does not reflect incident light equally in all directions instead it is concentrated in a
viewing cone. The audience sitting within the viewing cone area will see a brighter image than
those sitting just outside this area.
Wolf Cinema Owner's Manual
2-3